San Francisco backwater valves and the Floodwater Grant
A backwater valve can protect eligible low fixtures from sewer backflow; San Francisco code and SFPUC’s Floodwater Grant have specific conditions.
Water Damage Guard is based in San Carlos. Call (650) 550-0619, 24/7, to discuss property damage.
Local guidance and practical steps
San Francisco Plumbing Code section 710.1.1 requires approved backwater protection when a fixture’s flood rim is at or below the fresh-air inlet serving the house trap. A fixture with a higher flood rim must not discharge through that valve. SFPUC’s practical recommendation refers to the lowest fixture drain; a qualified plumber or DBI should evaluate the actual configuration. The code describes a fixture with its “flood rim level equal to or lower than the elevation of the fresh air inlet” serving the house trap.
SFPUC advises following the manufacturer’s maintenance instructions and checking the valve before each rainy season. A valve can be obstructed or damaged and does not protect against every route of outdoor water entry.
The Floodwater Grant can support qualifying measures after prior storm-related sewer backflow or flooding from an adjacent public right of way. SFPUC requires an active wastewater account and an executed agreement before project construction; its terms cap payments at $100,000 per property. Eligibility, approval and funding are not guaranteed. Submit the interest form and allow the agency’s site assessment before relying on support.