Portola Valley wildfire zone and defensible space rules: what they mean for fire repairs
Portola Valley property owners should check the fire hazard designation for the address and the Woodside Fire rules that apply to the parcel; the work proposed after a fire determines which repair reviews are needed.
Check the district map for the property
Woodside Fire Protection District lists Portola Valley among its communities. In July 2025 the Town’s wildfire committee reported that the district board had adopted CAL FIRE local responsibility area maps for its district. The map helps identify a property’s hazard designation; it does not establish that every home in Town has the same classification or that a past fire affected the property.
Use the official address lookup and ask the district about an uncertain boundary. Keep the map designation separate from the condition of a particular structure. For repairs after a fire, tell the reviewing officials what work is proposed and ask which building and fire requirements apply.
What the defensible-space rule says
Woodside Fire Ordinance 24-01 applies to improved parcels in its jurisdiction throughout the year. Its zones are measured from structures and attached decks without extending past the property line. The ordinance defines Zone 0 as extending “from 0 to 5 feet” from the structure or attached deck, subject to that boundary.
The district requires removal of hazardous vegetation and combustible materials within that first zone, with exceptions in the ordinance. The rule addresses exterior fuel management. It does not mean that removing soot inside a home is the same activity as rebuilding an exterior wall or replacing a deck. For a specific repair, confirm the applicable requirements with the Town and fire authority.
How to use that information after a fire
First follow the fire authority’s instructions on entry and utilities. Fire, smoke and water can affect different materials, and a damaged surface may conceal additional damage. Do not enter a restricted building or touch wet electrical equipment. Document the condition only from a safe position.
When a repair scope is known, identify whether work changes a roof, siding, vents, attached deck or nearby vegetation. Ask the relevant authority what review is required before ordering replacement materials. The answer depends on the actual work and the current code; a mapped zone alone does not determine the complete repair scope.
The district’s June 2025 notice distinguished the home assessment enforcement schedule from the year-round obligation to remove dry and dead vegetation. Ask the district about the present assessment process and any questions about the parcel rather than relying on an old inspection schedule.