High groundwater in Atherton: basement seepage and sump pumps
Basement water may come from groundwater, rainfall, runoff or a plumbing leak; a property-specific assessment is needed to distinguish them. A sump pump is not a substitute for identifying the source or complying with Atherton’s drainage criteria.
Groundwater and incidental water
The town checklist says a basement intercepting groundwater should be sealed and allow groundwater to pass around it. It allows a sump pump within the basement shell for “incidental water or leaks.” The town drainage criteria separately say groundwater pumping is not acceptable after construction is complete and set conditions for seepage, direct rain and nuisance flows.
Construction design and protection
For the construction pumping requirement, the town criteria call for a geotechnical engineer to certify historical high groundwater using the town map. The criteria also call for basement entrances to have one foot of protection above the 100-year water level. These requirements concern the situations described in the criteria; they do not establish the condition of an existing property.
What to do if water appears
Avoid entering standing water to reach a pump or switch. Seek safe electrical isolation and have a qualified professional assess the source, exterior conditions and discharge. If the basement is flooded, pumping too quickly while exterior soil remains saturated can affect the pressure on walls. Document conditions when safe and ask the town about proposed drainage changes.
Sources
- Official Atherton source Checked
- Official Atherton source Checked