Burlingame backwater valve and sewer backup prevention: rules and rebates
Burlingame’s lateral test procedure calls for an approved backwater valve when plumbing fixtures are below the city cleanout; the actual fixture elevations and project scope determine what must be done.
How the city evaluates fixture elevation
The city’s separate certificate guidance defines inadequate height differential by comparing the flood-level rim of a fixture with the next upstream manhole or flushing inlet. Its definition uses a threshold of less than one foot above that cover. Ask a qualified professional and the city to assess the actual building; the existence of a lower floor alone does not establish its elevation. The city test procedure uses the phrase “below the level of the City cleanout.”
Adding a drainage fixture
When a drainage fixture unit is added, the city describes a written certificate prepared by a qualified professional and submitted to the Building Department. The city page explains review and what to do if an inadequate differential is found. Check the current requirements for the proposed work before installing a fixture or closing a wall.
After sewage enters
A valve is a prevention measure, not cleanup for a room already affected. Stop using connected fixtures, keep people and pets away and arrange the appropriate city or plumbing response. Ask the installer how a device should be accessed and maintained. Ask the city whether any current assistance is available before relying on a rebate.
Sources
- Official local source Checked
- Official local source Checked