Palo Alto creek flooding: risk areas and cleanup after a storm

Palo Alto identifies San Francisquito Creek as its primary flood risk and publishes maps for different storm scenarios. Check the current information for the address and follow official alerts.

Call (650) 550-0619

Historical and current information

Valley Water’s 2017 report says the creek reached the top of the levee downstream of US-101 and water flooded near East Bayshore businesses. That historical event does not predict depth at a home in a future storm. The city describes four communication stages, including “Flood Warning” and Evacuation; follow the current message for the affected area.

After water enters

Stay out of floodwater and return only when authorities permit it. Do not enter standing water to reach a panel or use wet electrical equipment. The city’s storm FAQ says it cannot pump water from private homes or basements because of resource limitations; check current event guidance and arrange a safe assessment.

Before repair

The city advises checking with Development Services before building repairs about substantial-damage determinations and an emergency permit. Document the damage when safe and contact the insurer about the cause and applicable coverage. Coordinate source control, cleanup and any required inspection before covering affected materials.

Sources

Restoration in Palo Alto

More resources

Tell us what’s happening.

Open your email app with a prepared message. You can review it before sending.