Slab leaks in Mountain View: detection and repair in slab-on-grade homes
For a home with a slab, locate the leaking line before choosing a spot repair or reroute; a meter check can screen for water use but cannot prove the leak is under concrete.
Screen for water use, then locate the source
A City of Mountain View meter handout describes turning off water-using fixtures and watching the meter’s leak indicator. It then describes closing the house valve and repeating the observation to help distinguish flow between the meter and house from flow within the house or irrigation. This is a screening method, not proof that a leak lies beneath a slab.
If water continues to register, a qualified leak-detection professional can investigate the layout and conditions. Warm spots, a change in a bill or damp flooring may be clues but can have other causes. Locate the line and assess the building before deciding whether to open the floor.
Compare repair routes and ask about permits
A plumber may discuss accessing a short section, rerouting a line or replacing a longer run, depending on the actual location and condition. Ask what is known about other utilities before cutting concrete. A slab does not establish where the pipes are installed.
Mountain View’s permit-exemption page distinguishes stopping a leak without replacing or rearranging piping from removing and replacing a defective concealed pipe; the latter requires a permit. For qualifying residential water-pipe replacement, the city’s same-day permit page describes rough inspection before covering and final inspection after work is complete. Confirm eligibility and the specific scope with the Building Division.
Ask the utility about an unusual bill
Mountain View’s current meter guidance links to a water-credit application revised in 2023. That form describes a possible adjustment for qualifying leak-period use charged at the third tier, with one billing period eligible in three years. It instructs applicants to submit the form “after your leak has been fixed” and the bill for the leak period has arrived. Confirm eligibility and the serving utility; a slab leak does not itself guarantee a credit.
Keep the repair record and bill, then ask the serving utility whether an adjustment is available. The water supplier can differ by address, and a billing decision is separate from identifying and repairing the source.
Dry affected materials after repair
Once the line is repaired, assess wet flooring and adjacent materials. Moisture can remain under a finish even after the surface looks dry. Coordinate any openings and inspections before replacing the floor.
Water Damage Guard serves Mountain View from San Carlos and accepts calls at (650) 550-0619, 24/7. Leak location and pipe repair may require a plumbing specialist; restoration work is based on the affected materials found at the property.
Common questions
Does a moving meter prove a slab leak?
No. The city handout describes a flow check; additional investigation is needed to identify a location.
Is a leak credit guaranteed?
No. The city’s linked application describes conditional eligibility; confirm the current terms with the serving utility.