First establish safe access
Follow fire and building officials’ directions about entering the property. Fire can damage framing, ceilings, roofs and utility systems in ways that are not obvious from the doorway. A room with limited visible damage is not automatically safe, and a posted restriction must be respected until the responsible authority changes it.
Water used during suppression may reach electrical equipment. Do not enter standing water to reach a switch or panel, and do not operate a wet appliance. If gas is suspected, leave the area and call emergency responders from a safe place. A qualified professional or the utility should address damaged systems before cleanup equipment is used.
Once it is safe to do so, photograph the affected spaces and contents. Contact the insurer about emergency protection, an inventory and any requirements before disposal or reconstruction. Call Water Damage Guard at (650) 550-0619, 24/7, and explain the current access status and the damage observed.
Fire, smoke and suppression water
The cleanup scope depends on what burned, where smoke traveled and whether water entered the building. A room away from the fire may contain residue on surfaces or contents, while water can move below flooring or through openings into a lower level. The visible burn boundary does not necessarily define the complete area requiring assessment.
Provide the team with the location of rooms that officials have restricted, any recent repairs and the known route of water. Do not climb onto a damaged roof or enter an unstable attic. Structural and utility specialists may need to determine safe access before a restoration inspection can continue.
Ask for the assessment to distinguish immediate protection from cleaning, drying and reconstruction. These tasks may involve separate trades. If concealed conditions are discovered after a finish is opened, review the finding and any proposed change to the work before it proceeds.
Contents and smoke residue
Treatment depends on the item and the residue. A hard, accessible surface differs from upholstered furniture, electronics or paper records. Identify valuable or irreplaceable belongings before they are moved, and ask whether a specialist should assess them. Keep potentially contaminated items out of unaffected living spaces.
Do not run a damaged or smoke-exposed heating system simply to clear an odor. Have it evaluated before use if it may have been affected by heat, smoke or water. A smell is useful information for the assessment but does not establish the condition of every duct, filter or room.
Create an inventory and preserve photographs where safe. Ask the insurer what evidence is needed before items are discarded or treated. If a damaged item cannot safely remain in the home, follow the relevant professional or official instructions and record the decision without entering a hazardous area.
For an item with sentimental or monetary value, identify its location before removal begins and ask whether specialist cleaning or conservation is appropriate. The answer depends on the material, exposure and condition. A photograph taken safely before treatment can help preserve a record, but it should not require anyone to enter a room that officials or the assessment team have restricted.
Water remaining after the response
Suppression water can collect behind baseboards, under flooring or in a lower space. Before extraction or drying, establish that the structure and electrical supply are safe. Describe any opening through which rain can continue to enter, since weather protection and drying may need to be coordinated.
The team should explain which materials can be cleaned and dried and which may need removal because of heat, contamination or their condition. Ask how adjacent spaces will be checked and how the work area will be separated from rooms still in use. A dry-looking surface does not establish the condition behind it.
If a roof, utility line or other source remains damaged, the responsible trade should address it before replacement finishes are installed. Keep records of source correction, measurements and materials removed so the next contractor understands the condition of the assembly.
Palo Alto permit and demolition requirements
The city says projects submitted after January 1, 2026 must comply with its adopted 2025 California Building Codes and local amendments. Ask the Building Division how those requirements apply to the planned fire repair; a cleanup proposal does not itself authorize reconstruction or demolition that requires a permit.
Palo Alto’s 2026 deconstruction and demolition checklist calls for an existing floor plan and a proposed demolition floor plan for the applicable submittal. It also calls for civil plans when utilities are capped. These are requirements in that checklist, not a claim that every fire cleanup requires demolition or utility capping.
The city says construction and inspection activity cannot resume after a permit expires until reactivation is approved and the applicable fee is paid. Identify who will manage the permit, schedule required inspections and communicate any changes in scope before work is concealed.
A shared or rented building
Notify the owner, manager or association promptly and identify any posted restrictions. A fire in one unit can affect a shared ventilation system, a neighboring space or a common utility. The person controlling the building may need to coordinate access and the order of inspections.
If the home cannot be occupied, ask the insurer or housing adviser about temporary arrangements and the records needed. Keep dates and receipts, along with notices from officials. A restoration company cannot decide an individual tenant’s rights or guarantee the outcome of an insurance claim.
For a condominium, the governing documents and actual component involved affect access and repair responsibilities. Do not assume that the visible location of soot or water settles ownership of the underlying system. Preserve written communications and ask the association how the necessary work will be coordinated.
Completing the work in order
An appropriate sequence may include securing openings, inspecting the affected areas, addressing water, cleaning residue and then reconstruction. The order depends on site safety and the findings. A structural or utility professional may need to act before another contractor can safely enter.
Review the proposal by room and material. Ask how belongings will be protected, whether separate plumbing or electrical work is included and how new damage discovered during removal will be reported. Before covering repaired systems, coordinate any required inspections with the person responsible for the permit.
At the end of the agreed scope, review the records and remaining tasks. Identify who will complete any outstanding building, utility or contents work. A clear handoff is especially useful when several contractors and an insurer are involved.
Where several parties are working, agree who will communicate the completion of utility work, inspection dates and any newly discovered damage. A utility report, a permit inspection and a contents inventory answer different questions. Retaining each record helps the owner and insurer understand the sequence without assuming that one document covers the entire recovery.
Discuss a safe access route for occupants and contractors while the building remains under repair. Protect children and pets from the work area, and update the arrangement if the condition of the site or the officials’ instructions change.
Common questions
When can I enter after a fire?
Follow the directions of fire and building officials and any posted restriction; visible damage does not reveal every hazard.
Can smoke affect a room away from the fire?
Yes. Smoke and residue can travel beyond the burned room, so accessible surfaces and systems may need assessment.
Does every fire cleanup require demolition?
No. The scope depends on the damage. Palo Alto’s checklist applies when a deconstruction or demolition permit is needed.
What if utilities need capping during demolition?
The city’s 2026 demolition checklist calls for civil plans when utilities are capped. Confirm the requirements for the actual project.
What happens if a building permit expires?
Palo Alto says construction and inspections cannot resume until reactivation is approved and the applicable fee is paid.
Sources
- Palo Alto Building Division source Checked
- Palo Alto Building Division source Checked
- Palo Alto Building Division source Checked